Mercedes-Benz 2008 CLK-Class User Manual

130
Controls in detail
Lighting
Low beam headlamps
The low beam headlamps can be switched
on and off with the exterior lamp switch us-
ing the manual headlamp mode.
왘 Turn the exterior lamp switch to
position B.
The following lamps switch on:
앫 Low beam headlamps
앫 Tail and parking lamps
앫 License plate lamps
앫 Side marker lamps
Automatic headlamp mode
The following lamps switch on and off
automatically depending on the brightness
of the ambient light:
앫 Low beam headlamps
앫 Tail and parking lamps
앫 License plate lamps
앫 Side marker lamps
왘 Turn the exterior lamp switch to
position U.
With the SmartKey in starter switch
position 1 or the KEYLESS-GO*
start/stop button pressed once, the
tail and parking lamps, the license
plate lamps and the side marker lamps
will switch on and off depending on the
brightness of the ambient light.
When the engine is running, the low
beam headlamps, the tail and parking
lamps, the license plate lamps, and the
side marker lamps will switch on and
off depending on the brightness of the
ambient light.
Warning! G
If the exterior lamp switch is set to U,
the headlamps will not be automatically
switched on under foggy conditions.
To minimize risk to you and to others,
activate headlamps by turning exterior lamp
switch to B when driving or when traffic
and/or ambient lighting conditions require
you to do so.
In low ambient lighting conditions, only
switch from position U to B with the
vehicle at a standstill in a safe location.
Switching from U to B will briefly
switch off the headlamps. Doing so while
driving in low ambient lighting conditions
may result in an accident.
The automatic headlamp feature is only an
aid to the driver. The driver is responsible for
the operation of the vehicle’s lights at all
times.
i
Canada only:
High beam headlamps are only available with the
exterior lamp switch in position B.

Mercedes-Benz 2008 CLK-Class Specifications

General

Brand	Mercedes-Benz
Model	2008 CLK-Class
Category	Automobile
Language	English