442
Practical hints
Replacing SmartKey batteries
SmartKey / SmartKey with
KEYLESS-GO*
Replacement batteries: Lithium, type
CR 2025 or equivalent.
왘 Remove the mechanical key from the
SmartKey or SmartKey with
KEYLESS-GO* (
컄 page 427).
1 Mechanical key
2 Battery compartment
왘 Insert mechanical key 1 into the
opening.
왘 Press mechanical key 1 in direction of
arrow.
The battery compartment 2 is un-
latched.
왘 Pull battery compartment 2 out of the
housing.
3 Batteries
4 Contact spring
왘 Remove the batteries 3.
왘 Using a lint-free cloth, insert new
batteries 3 under the contact
springs 4 with the positive terminal
(+) side facing up.
왘 Return battery compartment 2 into
housing until it locks into place.
왘 Slide mechanical key 1 back into the
SmartKey.
왘 Check the operation of the SmartKey.