Mercedes-Benz 2008 CLK-Class User Manual

155
Controls in detail
Control system
Should the vehicle’s system record any
conditions while driving, the number of
messages will reappear in the multifunc-
tion display when the SmartKey in the
starter switch is turned to position 0 or
removed from the starter switch. With
KEYLESS-GO*, turn off the engine by
pressing the KEYLESS-GO* start/stop
button and open the driver’s door.
Settings menu
In the
Settings... menu there are two
functions:
앫 The function Reset to factory
settings?
, with which you can reset all
the settings to the original factory
settings.
앫 A collection of submenus with which
you can make individual settings for
your vehicle.
왘 Press button è or ÿ repeatedly
until the
Settings... menu appears in
the multifunction display.
Resetting all settings
You can reset all the functions of all
submenus to the factory settings.
왘 Press the reset button in the
instrument cluster (
컄 page 138) for
approximately three seconds.
The request to press the reset button
once more to confirm appears in the
multifunction display.
왘 Press the reset button once more.
The functions of all the submenus will
reset to factory settings.
i
The vehicle status message memory will be
cleared when you switch on the ignition
(
컄 page 40). You will then only see high-priority
messages in the multifunction display
(
컄 page 392).

Mercedes-Benz 2008 CLK-Class Specifications

General

Brand	Mercedes-Benz
Model	2008 CLK-Class
Category	Automobile
Language	English