Control system
126
Control system
Introduction
The control system is activated as soon as the
starter switch is in position 1 (Y page 87).
The control system enables you to call up
information about your vehicle and to change
vehicle settings.
For example, you can use the control system
to find out when your vehicle is next due for
maintenance service, to set the language for
messages in the instrument cluster display,
and much more.
G
Warning!
A driver’s attention to the road and traffic
conditions must always be his/her primary
focus when driving.
For your safety and the safety of others,
selecting features through the multifunc-
tion steering wheel should only be done by
the driver when traffic and road conditions
permit it to be done safely.
Bear in mind that at a speed of just 30 mph
(approximately 50 km/h), your vehicle is
covering a distance of 44 feet (approxi-
mately 14 m) every second.
The control system relays information to the
multifunction display.
Multifunction steering wheel
The displays in the multifunction display and
the settings in the control system are con-
trolled by the buttons on the multifunction
steering wheel.
1
Left multifunction display in the
speedometer
2
Right multifunction display in the
tachometer
3
Press button
s
to take a call
to dial
5
to redial
5
t
to end a call
to reject an incoming call
Press button
æ
ç
to select submenus in the Set-
tings menu
to set values
to operate the RACETIMER
6
to set the volume
4
Press button
è
ÿ
to select next or previous menu
5
Function only available in telephone menu.
6
AMG vehicles only.
Controls in detail
To Next Page
Loading...
Need help?
General
