What to do if …
293
What to do if …
Lamps in instrument cluster
Notes
If any of the following lamps in the instrument
cluster fails to come on during the bulb self-
check when switching on the ignition, have
the respective bulb checked and replaced if
necessary.
When you switch on the ignition, all lamps
(except high beam headlamp indicator lamp,
and turn signal indicator lamps unless acti-
vated) in the instrument cluster come on. If a
lamp in the instrument cluster fails to come
on when the ignition is switched on, have it
checked and replaced if necessary.
Practical hints
Z
To Next Page
Loading...
Need help?
General
