Seats
94
X
Switch on the ignition.
X
Switching on seat heating: Press switch
1.
Both red indicator lamps in switch 1 come
on.
X
Switching off seat heating: Press switch
1 repeatedly until all red indicator lamps
go out.
If one or both of the indicator lamps in the
seat heating switch are flashing, there is
insufficient voltage available since too many
electrical consumers are turned on. The seat
heating switches off automatically.
The seat heating will switch back on again
automatically as soon as sufficient voltage is
available.
AIRSCARF neck-level heating
The AIRSCARF neck-level heating provides
the area surrounding the occupants’ necks
with a heated air stream flowing from open-
ings in the head restraints.
G
Warning!
When switching on the AIRSCARF neck-
level heating, the air streaming from the
openings may be very hot. When in close
proximity to the openings, you could be
seriously burned. To help avoid serious per-
sonal injuries, switch the AIRSCARF to a
lower heating level.
1
AIRSCARF switch
X
Switch on the ignition.
X
Switching on: Press AIRSCARF switch 1
for the desired side.
All three indicator lamps on respective AIR-
SCARF switch 1 come on. After a pre-
heating time of approximately 10 seconds,
the blower starts.
X
Press AIRSCARF switch 1 repeatedly until
the desired AIRSCARF heating level for the
corresponding seat is reached.
X
Switching off: Press AIRSCARF switch
1 repeatedly until all indicator lamps on
AIRSCARF switch 1 go out.
After switching off the AIRSCARF neck-level
heating, the AIRSCARF fan continues to oper-
ate for approximately 7 seconds to cool down
the heater elements.
Controls in detail
To Next Page
Loading...
Need help?
General
