EasyManuals Logo

Mercedes-Benz 2016 GLA User Manual

Mercedes-Benz 2016 GLA
390 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #159 background imageLoading...
Page #159 background image
Problem
Possible causes/consequences and M Solutions
The engine is not run-
ning smoothly and is
misfiring.
There is a malfunction in the engine electronics or in a mechanical
component of the engine management system.
X
Only depress the accelerator pedal slightly.
Otherwise, non-combusted fuel may get into the catalytic con-
verter and damage it.
X
Have the cause rectified immediately at a qualified specialist
workshop.
The coolant tempera-
ture gauge shows a
value above 248 ‡
(120 †). The coolant
warning lamp may also
be on and a warning
tone may sound.
The coolant level is too low. The coolant is too hot and the engine
is no longer being cooled sufficiently.
X
Stop as soon as possible and allow the engine and the coolant to
cool down.
X
Check the coolant level (Y page 311). Observe the warning
notes as you do so and add coolant if necessary.
DYNAMIC SELECT button (all vehicles
except Mercedes-AMG vehicles)
Use the DYNAMIC SELECT button to change
the drive program. Depending on the drive
program selected the following vehicle char-
acteristics will change:
R
the drive (engine and transmission man-
agement)
R
the steering
R
the availability of the ECO start/stop func-
tion
R
the climate control:
Each time you start the engine with the
SmartKey or the Start/Stop button, drive pro-
gram C is activated. For further information
about starting the engine, see (
Y page 151).
X
Press DYNAMIC SELECT button : as many
times as necessary until the desired drive
program is selected.
The selected drive program appears in the
multifunction display. After five seconds
the display goes out and the status icon of
the selected drive program appears.
In addition, the current drive program set-
tings are displayed briefly in the Audio 20 or
COMAND display.
i
In a few countries, the ECO start/stop
function is deactivated at the factory due to
the available fuel grade. In this case, the
ECO start/stop function is not available in
any drive program, regardless of the display
in the Audio 20 or COMAND display.
DYNAMIC SELECT button (all vehicles except Mercedes-AMG vehicles)
157
Driving and parking
Z

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercedes-Benz 2016 GLA and is the answer not in the manual?

Mercedes-Benz 2016 GLA Specifications

General IconGeneral
BrandMercedes-Benz
Model2016 GLA
CategoryAutomobile
LanguageEnglish

Related product manuals