heating should also not be used to dry
the seats.
R
clean the seat covers as recommended;
see the "Interior care" section.
R
do not transport heavy loads on the
seats. Do not place sharp objects on the
seat cushions, e.g. knives, nails or tools.
The seats should only be occupied by
passengers, if possible.
R
when the seat heating is in operation, do
not cover the seats with insulating mate-
rials, e.g. blankets, coats, bags, seat cov-
ers, child seats or booster seats.
!
Make sure that there are no objects in the
footwell under or behind the seats when
moving the seats back. There is a risk that
the seats and/or the objects could be dam-
aged.
i
The head restraints are equipped with the
NECK-PRO system (
Y page 56). For this
reason, it is not possible to remove the
head restraints from the seats.
For more information, contact a qualified
specialist workshop.
Adjusting the seats manually
X
To set seat fore-and-aft adjustment: lift
lever : and slide the seat forwards or
backwards.
X
Release lever : again.
Make sure that you hear the seat engage in
position.
X
To adjust the backrest angle: relieve the
pressure on the backrest.
X
Pull handle ; and adjust the backrest to
the desired angle.
X
Release handle ; again.
The backrest must audibly engage.
X
To adjust the seat height: pull handle =
upwards or push it down repeatedly until
the seat has reached the desired height.
Adjusting the seats electrically
:
Backrest angle
;
Seat fore-and-aft adjustment
=
Seat cushion angle
?
Seat height
i
You can store the seat settings using the
memory function (
Y page 106).
Adjusting the head restraints
G
WARNING
You could lose control of your vehicle if you do
the following while driving:
R
adjust the driver's seat, head restraint,
steering wheel or mirrors
R
fasten the seat belt
There is a risk of an accident.
Adjust the driver's seat, head restraint, steer-
ing wheel and mirror and fasten your seat belt
before starting the engine.
98
Seats
Seats, steering wheel and mirrors
To Next Page
Loading...
Need help?
General
