R
the trip computer
R
the current consumption and the range
R
the navigation instructions in the Navi
menu
R
cruise control
R
DISTRONIC PLUS
R
ASSYST PLUS service interval display
Selecting permanent display
The Permanent Display:
function allows
you to choose whether the multifunction dis-
play always shows the outside temperature or
the speed in km/h. Canada only: the speed is
shown in mph. The speed display is inverse to
the speedometer.
X
Press the = or ; button on the steer-
ing wheel to select the Sett.
menu.
X
Press the : or 9 button to select the
Instrument Cluster
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Permanent Display:
function.
The current setting Outside
Temperature
or Speedometer [km/h]/Speedometer
[mph] appears.
X
Press the a button to save the setting.
Lights
Setting the daytime running lamps
This function is not available in Canada.
X
Press the = or ; button on the steer-
ing wheel to select the Sett.
menu.
X
Press the : or 9 button to select the
Light
submenu.
X
Press a to confirm.
X
Press : or 9 to select the Daytime
Running Lights function.
If the Daytime Running Lights
function
has been switched on, the multifunction
display shows the cone of light and the
W symbol in orange.
X
Press the a button to save the setting.
Further information on daytime running
lamps (
Y page 108).
Setting the brightness of the ambient
lighting
X
Press the = or ; button on the steer-
ing wheel to select the Sett.
menu.
X
Press the : or 9 button to select the
Light
submenu.
X
Press a to confirm.
X
Press the : or 9 button to select the
Amb. Light +/-
function.
The current setting appears.
X
Press a to confirm.
X
Press the : or 9 button to adjust the
brightness to a level from Disabled
to
Level 5
(bright).
X
Press the a or % button to save the
setting.
Activating/deactivating surround light-
ing and exterior lighting delayed switch-
off
X
Press the = or ; button on the steer-
ing wheel to select the Sett.
menu.
X
Press the : or 9 button to select the
Light
submenu.
X
Press a to confirm.
X
Press : or 9 to select the Sur‐
round Lighting function.
If the Surround
Lighting function is acti-
vated, the multifunction display shows the
light cone and the area around the vehicle
in orange.
X
Press the a button to save the setting.
Deactivating delayed switch-off of the exte-
rior lighting temporarily:
X
Before leaving the vehicle, turn the Smart-
Key to position 0 in the ignition lock.
X
Turn the SmartKey to position 2 in the igni-
tion lock.
The exterior lighting delayed switch-off is
deactivated.
Menus and submenus
205
On-board computer and displays
Z
To Next Page
Loading...
Need help?
General
