Windshield wiper and windshield washer
system
Switching the windshield wipers on/off
1
g Windshield wipers off
2
Ä Automatic wiping, normal
3
Å Automatic wiping, frequent
4
° Continuous wiping, slow
5
¯ Continuous wiping, fast
#
Turn the combination switch to the correct
position 1 - 5.
#
Single wipe/washing: push the button on
the combination switch in the direction of
arrow 1.
R
í Single wipe
R
î Wipes with washer fluid
Changing the windshield wiper blades
&
WARNING Risk of becoming trapped if
the windshield wipers are switched on
while wiper blades are being replaced
If the windshield wipers begin to move while
you are changing the wiper blades, you can
be trapped by the wiper arm.
#
Always switch off the windshield wipers
and the ignition before changing the
wiper blades.
Moving the wiper arms into the replacement
position
#
Switch the ignition on and switch off again
immediately.
#
Within around 15 seconds, press the î
button on the combination switch for approx‐
imately three seconds(/ page 120).
The wiper arms will move into the replace‐
ment position.
Removing the wiper blades
#
Fold the wiper arms away from the wind‐
shield.
120
Light and visibility
To Next Page
Loading...
Need help?
General
