Overview of climate control systems
Notes on climate control
An interior air filter in combination with the pre‐
filter in the engine compartment must always be
used so that the air conditioning system, pollu‐
tion level monitoring and the air filtration work
correctly. Make sure that the filter is installed
correctly and the filter housing in the engine
compartment is closed correctly using the cap
and always tightly sealed when in operation. Use
filters recommended and approved by
Mercedes-Benz. Always have service work car‐
ried out at a qualified specialist workshop.
Overview of the control panel for 3-zone
automatic climate control
The indicator lamps in the Ã, ¬, ¤,
g, Á and 0 buttons indicate that the
corresponding function is activated.
1
w Sets the temperature on the driver's
side
2
_ Sets the air distribution
3
H Sets the airflow or switches off climate
control
4
à Sets climate control to automatic
(/ page 127)
5
¬ Defrosts the windshield
6
¤ Switches the rear window heater
on/off
7
g Switches air-recirculation mode on/
off(/ page 128)
8
Á Switches the A/C function on/
off(/ page 126)
Switches residual heat on/off (/ page 128)
9
0 Activates/deactivates synchroniza‐
tion(/ page 128)
A
w Sets the temperature on the front
passenger side
Operating the climate control system
Switching climate control on/off
#
To switch on: set the airflow to level 1 or
higher using the H button.
#
To switch off: set the airflow to level 0 using
the H button.
%
If climate control is switched off, the win‐
dows may fog up more quickly. Switch off
climate control only briefly.
Switching the A/C function on or off via the
control panel
The A/C function heats, cools and dehumidifies
the vehicle's interior air.
#
Press the ¿Á button.
126
Climate control
To Next Page
Loading...
Need help?
General
