Configuring drive program I
Multimedia system:
4
Vehicle
5
e DYNAMIC SELECT
5
Individual
#
Select the individual setting.
Switching the operation feedback for drive
program on/off
Multimedia system:
4
Vehicle
5
e DYNAMIC SELECT
#
Switch Notification for User on O or off ª.
When this function is active, a corresponding
message is shown in the media display when
a drive program is selected with the
DYNAMIC SELECT switch.
Displaying vehicle data
Multimedia system:
4
Vehicle
5
e DYNAMIC SELECT
#
Select Vehicle Data.
The vehicle data is displayed.
Displaying engine data
Multimedia system:
4
Vehicle
5
e DYNAMIC SELECT
#
Select Engine Data.
%
The actual (maximum) values that can be
achieved for engine output and engine tor‐
que may deviate from the certified values
within the country-specific guidelines for
permissible tolerances (basis: UN-ECE No.
85 or country-specific guidelines).
Factors that can influence this are, for exam‐
ple:
R
Sea level
R
Fuel grade
R
Outside temperature
%
The values displayed serve only as orienta‐
tion. The values for engine output and
engine torque shown in the media display
may deviate from the actual values.
Automatic transmission
DIRECT SELECT lever
Function of the DIRECT SELECT lever
&
WARNING Risk of accident due to incor‐
rect gearshifting
If the engine speed is higher than the idle
speed and you engage the transmission posi‐
tion h or k, the vehicle may accelerate
sharply.
#
If you engage the transmission position
h or k when the vehicle is at a
standstill, always depress the brake
pedal firmly and do not accelerate at
the same time.
156
Driving and parking
To Next Page
Loading...
Need help?
General
