#
Place the ratchet onto the hexagon nut of the
jack so that the letters "AB" are visible.
#
To lower the vehicle: turn the ratchet of the
jack counter-clockwise.
#
Tighten the wheel bolts evenly in a diagonal
pattern in the order indicated 1 to 5 with
a maximum of 59 lb-ft (80 Nm).
#
Tighten the wheel bolts evenly in a diagonal
pattern in the order indicated 1 to 5 to
the specified tightening torque of 111 lb-ft
(150 Nm).
&
WARNING Risk of injury through incor‐
rect tightening torque
The wheels could come loose if the wheel
bolts or wheel nuts are not tightened to the
prescribed tightening torque.
#
Make sure the wheel bolts or wheel
nuts are tightened to the prescribed
tightening torque.
#
If you are not sure, do not move the
vehicle. Consult a qualified specialist
workshop and have the tightening tor‐
que checked immediately.
#
Check the tire pressure of the newly moun‐
ted wheel and adjust accordingly.
#
Vehicles with tire pressure loss warning
system: Restart the tire pressure loss warn‐
ing system (/ page 406).
Exception: the new wheel is an emergency
spare wheel.
#
Vehicles with a tire pressure monitoring
system: Restart the tire pressure monitoring
system (/ page 404).
Exception: the new wheel is an emergency
spare wheel.
Make sure to observe the following further rela‐
ted subject:
R
Notes on tire pressure (/ page 399)
Emergency spare wheel
Notes on the emergency spare wheel
&
WARNING Risk of accident caused by
incorrect wheel and tire dimensions
The wheel or tire size and the tire type of the
emergency spare wheel or spare wheel and
the wheel to be replaced may differ. Mount‐
ing an emergency spare wheel/spare wheel
may severely impair the driving characteris‐
tics.
To prevent hazardous situations:
428
Wheels and tires
To Next Page
Loading...
Need help?
General
