When the starting assistance/charging process
is complete:
#
First, remove the jumper cable/charging
cable from ground point 3 and negative
pole of the donor battery, then from positive
clamp 2 and positive pole of the donor bat‐
tery. Begin each time with the contacts on
your own vehicle first.
#
After removing the jumper cable/charging
cable, close cover 1 of positive clamp 2.
You can obtain further information on starting
assistance at any qualified specialist workshop.
Tow starting or towing away
Permitted towing methods
Mercedes-Benz recommends transporting your
vehicle in the case of a breakdown, rather than
towing it away.
*
NOTE Damage to the vehicle due to tow‐
ing away incorrectly
#
Observe the instructions and notes on
towing away.
Breakdown assistance
343
To Next Page
Loading...
Need help?
General
