Display messages
Introduction
Notes on display messages
Display messages appear in the multifunction
display.
Display messages with graphic symbols are sim‐
plified in the Operator's Manual and may differ
from the symbols in the multifunction display.
The multifunction display shows high-priority dis‐
play messages in red. Certain display messages
are accompanied by a warning tone.
Please respond in accordance with the display
messages and follow the additional notes in this
Operator's Manual.
For some display messages, a symbol is also
shown:
R
¤ Further information
R
O Hide display message
You can select the desired symbol by swiping
left or right on the left-hand side of Touch Con‐
trol. Press the ¤ symbol to show further
information. Press the O symbol to hide the
display message.
You can hide low-priority display messages by
pressing the % button or the left-hand side of
Touch Control. The display messages are then
stored in the message memory.
Rectify the cause of a display message as
quickly as possible.
High-priority display messages cannot be hid‐
den. The multifunction display shows these dis‐
play messages continuously until the cause for
the message has been rectified.
Calling up stored display messages
On-board computer:
,
.
If there are no display messages,
appears in the multifunction display.
#
Scroll through the display messages by swip‐
ing upwards or downwards on Touch Control
on the left-hand side of the steering wheel.
#
To exit the message memory: press the
% button.
394
Display messages and warning/indicator lamps
To Next Page
Loading...
Need help?
General
