Display messages
Possible causes/consequences and M
Solutions
*Adaptive Highbeam Assist is temporarily unavailable.
The system limitations have been reached (
→ page 117).
#
Drive on.
Once the cause of the problem is no longer present, the system will be available again. The
display message appears.
*The camera view is restricted. Possible causes:
R
Dirt on the windshield in the camera's field of vision
R
Heavy rain, snow or fog
Driving systems and driving safety systems may be malfunctioning or temporarily unavailable.
Once the cause of the problem is no longer present, driving systems and driving safety systems are available again.
If the display message does not disappear:
#
Pull over and stop the vehicle safely as soon as possible, paying attention to road and traffic conditions.
#
Clean the windshield.
Warning and indicator lamps
Overview of warning and indicator lamps
Some systems perform a self-test when the igni‐
tion is switched on. Some warning and indicator
lamps may briefly light up or flash. This behavior
is non-critical. These warning and indicator
lamps only indicate a malfunction if they light up
or flash after the engine is started or during a
journey.
440
Display messages and warning/indicator lamps
To Next Page
Loading...
Need help?
General
