129
Controls in detail
Memory function
The memory button and stored position
switch are located on the door.
1 Memory position buttons
2 Memory button
왘 Switch on the ignition (컄 page 34).
or
왘 Open the respective door.
Storing positions into memory
왘 Adjust the seats, steering wheel and
exterior rear view mirrors to the de-
sired position (
컄 page 37).
왘 Press memory button 2.
왘 Release memory button 2 and push
one of the position buttons 1 within
three seconds.
All the settings are stored with the se-
lected position.
Recalling positions from memory
왘 Press and hold one of the position
buttons 1 until the seat, steering
wheel and exterior rear view mirrors
have fully moved to the stored posi-
tions.
i
Releasing the button immediately
stops movement to the stored posi-
tions.
Warning! G
Do not operate the power seats using the
memory button if the seat backrest is in an
excessively reclined position. Doing so
could cause damage to front or rear seats.
First move seat backrest to an upright posi-
tion.
To Next Page
Need help?
General
