289
Operation
Engine compartment
Checking the engine oil level with the
control system
When checking the oil level
앫 the vehicle must be parked on level
ground
앫 with the engine at operating tempera-
ture, the vehicle must have been sta-
tionary for at least five minutes with the
engine turned off
앫 with the engine not at operating tem-
perature yet, the vehicle must have
been stationary for at least 30 minutes
with the engine turned off
To check the engine oil level via the multi-
function display, do the following:
왘 Switch on the ignition (컄 page 34).
The standard display (
컄 page 148) should
appear in the multifunction display.
왘 Press button k or j on the
steering wheel until the following mes-
sage is seen in the multifunction dis-
play:
One of the following messages will sub-
sequently appear in the indicator:
앫
ENGINE OIL LEVEL
OK
앫
ADD 1.0 QT. TO
REACH MAX. OIL LEVEL
(Canada:
1.0 LITER
)
앫
ADD 1.5 QTS. TO
REACH MAX. OIL LEVEL
(Canada:
1.5 LITERS
)
앫
ADD 2.0 QTS.
TO REACH MAX. OIL LEVEL
(Canada:
2.0 LITERS
)
왘 If necessary, add engine oil.
For adding engine oil (
컄 page 292).
For more information on engine oil, see the
“Technical data” section (
컄 page 433) and
(
컄 page 435).
i
If you want to interrupt the checking
procedure, press the k or j
button on the multifunction steering
wheel.
To Next Page
Loading...
Need help?
General
