399
Practical hints
Replacing bulbs
Parking and standing lamp bulb
왘 Press the tab on cover 2 and remove
cover.
왘 Pull out the bulb socket 5 with the
bulb.
왘 Pull the bulb out of the bulb socket 5.
왘 Insert a new bulb in the bulb socket 5.
왘 Reinstall the bulb socket 5.
왘 Press cover 2 onto the housing until
the tab engages.
Side marker lamp bulb
왘 Carefully slide lamp towards rear.
왘 Remove front end first.
왘 Twist bulb socket counterclockwise
and pull out.
왘 Pull bulb out of the bulb socket.
왘 Insert new bulb in socket.
왘 Reinstall bulb socket, push in and twist
clockwise.
왘 To reinstall lamp, set rear end in
bumper and let front end snap into
place.
Replacing bulbs for rear lamps
Before you start to replace a bulb for a rear
lamp, do the following first:
왘 Turn the exterior lamp switch to M
(
컄 page 50).
왘 Open the trunk (컄 page 103).
To Next Page
Loading...
Need help?
General
