433
Technical data
Fuels, coolants, lubricants, etc.
ì™” Fuels, coolants, lubricants, etc.
Capacities Vehicle components and their respective
lubricants must match. Therefore use only
products tested and approved by
Mercedes-Benz.
Please refer to the Factory Approved Ser-
vice Products pamphlet, or inquire at your
Mercedes-Benz Center.
Model Capacity Fuels, coolants, lubricants, etc.
Engine with oil filter S 430, S 500
S 55 AMG
S 600
S 65 AMG
8.5 US qt. (8.0 l)
7.9 US qt. (7.5 l)
9.5 US qt. (9.0 l)
11.0 US qt (10.5 l)
Approved engine oils
Automatic transmission
S 600, S 65 AMG
9.1 US qt. (8.6 l)
8.1 US qt. (7.7 l)
MB Automatic Transmission Fluid
Rear axle
S 55 AMG, S 600
S 65 AMG
1.7 US qt. (1.6 l)
2.1 US qt. (2.0 l)
Hypoid gear oil SAE 85 W 90
Front axle S 430 4MATIC
S 500 4MATIC
0.63 US qt. (0.6 l) Hypoid gear oil SAE 85 W 90
Transfer case S 430 4MATIC
S 500 4MATIC
0.62 US qt. (0.585 l) MB Transfer Case Oil
Hydraulic system for ADS or ABC 4.2 US qt. (4.0 l) MB Hydraulic Fluids
Power steering approx. 1.1 US qt. (1.0 l) MB Power Steering Fluid (Pentosin
CHF 11S)
To Next Page
Loading...
Need help?
General
