161
Controls in detail
Control system
Submenus in the Settings menu
왘 Press button j.
In the multifunction display you see the
collection of the submenus.
왘 Press button ç or æ.
The selection marker moves to the next
submenu.
The submenus are arranged by hierarchy.
Scroll down with the ç button, scroll up
with the æ button.
With the selection marker on the desired
submenu, use the j button to access
the individual functions within that sub-
menu. Once within the submenu, you can
use the button j to move to the next
function or the button k to move to the
previous function within that submenu.
The settings themselves are made with
button æ or ç.
Resetting the functions of a submenu
For each submenu you can reset all the
functions to the factory settings.
왘 Move to a function in the submenu.
왘 Press the reset button J in the instru-
ment cluster (
컄 page 140) for approxi-
mately three seconds.
In the multifunction display you will see
the request to press the reset
button J again to confirm.
왘 Press the reset button J again.
All functions of the submenu will reset
to factory settings.
To Next Page
Loading...
Need help?
General
