Mercury 200 Optimax User Manual

MAINTENANCE
55
NOTE: Engine can be stopped or running at idle speed when
flushing the cooling system. Do not flush engine using a water
system that exceeds 310.26 kPa (45 psi).
1. Remove the plug from fitting in the bottom cowl.
29444
2. Attach a water hose to the fitting. Turn on the water and flush
for 3 to 5 minutes.
29445
Top Cowl Removal And Installation
REMOVAL
1. Release the front and side cowl latches.
2. Lift the top cowl from the outboard.
29447
INSTALLATION
1. Position the top cowl over the engine.
2. Ensure the bottom rubber seal fits properly and lock the front
and side latches.
Cleaning Care for Top Cowl
IMPORTANT: Dry wiping (wiping the plastic surface when it is dry)
will result in minor surface scratches. Always wet the surface
before cleaning. Follow cleaning and waxing procedure.

Mercury 200 Optimax Specifications

General

Brand	Mercury
Model	200 Optimax
Category	Outboard Motor
Language	English