EasyManuals Logo
Home>Mercury>Outboard Motor>200 Optimax

Mercury 200 Optimax User Manual

Mercury 200 Optimax
122 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #89 background imageLoading...
Page #89 background image
TROUBLESHOOTING
81
Starter Motor Will Not Crank the Engine
POSSIBLE CAUSES
Blown 20 amp fuse in the starting circuit. Refer to
Maintenance.
Outboard is not shifted to neutral position.
Weak battery or battery connections are loose or corroded.
Ignition key switch failure.
Wiring or electrical connection faulty.
Starter motor solenoid or slave solenoid failure.
Engine Will Not Start
POSSIBLE CAUSES
Lanyard stop switch not in "RUN" position.
Battery not fully charged.
Incorrect starting procedure. Refer to Operation section.
Old or contaminated fuel.
Fuel is not reaching the engine.
Fuel tank is empty.
Fuel tank vent not open or restricted.
Fuel line is disconnected or kinked.
Primer bulb not squeezed.
Primer bulb check valve is faulty.
Fuel filter is obstructed. Refer to Maintenance section.
Fuel pump failure.
Fuel tank filter obstructed.
Open 20 amp fuse. Check fuses, refer to Maintenance
section.
Threaded connection of an air hose is loose.
Ignition system component failure.
Spark plugs fouled or defective. Refer to Maintenance
section.

Table of Contents

Other manuals for Mercury 200 Optimax

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Mercury 200 Optimax and is the answer not in the manual?

Mercury 200 Optimax Specifications

General IconGeneral
BrandMercury
Model200 Optimax
CategoryOutboard Motor
LanguageEnglish

Related product manuals