Mercury 200 User Manual

MAINTENANCE
59
2. Attach a water hose to the fitting. Turn on the water and flush
for 3 to 5 minutes.
29297
Top Cowl Removal And Installation
REMOVAL
1. Pull out the front cowl latch.
28431
2. Lift front of cowl to clear front latch and push toward the rear
to clear rear hooks.
3. Lift top cowl to remove.
INSTALLATION
1. Lower top cowl into position over engine.
2. Move the cowl toward the rear to align rear hooks. After rear
hooks have engaged, move cowl toward front and push down
front of cowl.
3. Push in latch to secure top cowl.
Exterior Care
Your outboard is protected with a durable baked enamel finish.
Clean and wax often using marine cleaners and waxes.

Mercury 200 Specifications

General

Brand	Mercury
Model	200
Category	Outboard Motor
Language	English