Handle locked in the lift position
5. With a firm grip on the handle, carefully lift the cowl off the engine.
INSTALLATION
1. With a firm grip on the handle, carefully lower the top cowl over the
engine.
2. Verify the cowl is correctly aligned by checking the cowl alignment guides
on the port and starboard side of the cowl. If there is misalignment, one
side of the cowl will have a gap that is larger than the other side.
NOTE: It may be necessary to slightly lift the larger gap side of the cowl to
correctly position the alignment guides.
3. Gently push down on the cowl.
4. Push the red lock button and pull the handle. Continue to push the handle
down into the locked position.
5. Close the service access door.
Battery Inspection
The battery should be inspected at periodic intervals to ensure proper engine
starting capability.
IMPORTANT: Read the safety and maintenance instructions which accompany
your battery.
1. Turn off the engine before servicing the battery.
2. Ensure the battery is secure against movement.
MAINTENANCE
54 eng
To Next Page
Loading...
Need help?
General
