8. Push on the end of the spark plug boot to ensure the boot is completely
engaged and seated onto the spark plug.
Push the spark plug boot
9. Install the top cowl.
Fuses
IMPORTANT: An ATC fuse has the fuse element enclosed or sealed inside the
plastic housing. This type of fuse must be used for marine applications. Marine
applications are exposed to environments that may have the potential to
accumulate explosive vapors. ATO fuses have exposed elements and should
never be used in marine applications.
The electrical wiring circuits on the outboard are protected from overload with
fuses. If a fuse is open, try to locate and correct the cause of the overload. If
the cause is not found, the fuse may open again.
MAINTENANCE
64 eng
To Next Page
Loading...
Need help?
General
