Lubrication Points
1. Lubricate the following with Quicksilver or Mercury Precision
2‑4‑C with Teflon.
Tube Ref No. Description Where Used Part No.
95
2-4-C with Teflon Driveshaft bearing
92-802859A
1
IMPORTANT: It is important not to use a general all purpose
grease for this bearing. The lubricant recommended is a water
resistant grease of the proper consistency for this application. If a
substitute is used, be sure that it is water resistant.
• Driveshaft bearing
i. Pull vent hose off of the grease fitting.
ii. Pump in grease through the grease fitting, using the
grease gun provided, until excess grease starts to exit
the vent hose.
To Next Page
Loading...
Need help?
General
