4. Continue adding the lubricant until it appears at the rear vent hole.
5. Stop adding the lubricant. Install the rear vent plug and sealing washer
before removing lubricant tube.
6. Remove the lubricant tube and install cleaned fill/drain plug and sealing
washer.
Submerged Outboard
A submerged outboard will require service within a few hours by an authorized
dealer once the outboard is recovered from the water. This immediate attention
by a servicing dealer is necessary once the engine is exposed to the
atmosphere to minimize internal corrosion damage to the engine.
MAINTENANCE
eng 71
To Next Page
Loading...
Need help?
General
