TRANSPORTING
35
Carrying, Storing and Transporting Your Outboard
When Removed From Boat
IMPORTANT: Ensure the proper procedures are followed for
transportation and storage of the outboard to avoid the possibility
of oil leaks.
1. With the outboard still in the water, disconnect the remote fuel
line and run engine until it stops. This will drain fuel from the
carburetor. Install the protector cap over the fuel connector.
a - Protector cap
2. Remove outboard and hold it upright until the water is drained
out. Keep the outboard in an upright position when carrying.
To Next Page
Loading...
Need help?
General
