FUEL DELIVERY SYSTEM FOR ELECTRONIC FUEL INJECTION
SERVICE MANUAL NUMBER 23
90-861326--1 MARCH 1999 Page 5A-11
Water Separating Fuel Filter
NOTICE
Refer to “Precautions” in this section, BEFORE proceeding.
a
b
c
d
e
f
g
h
i
j
k
l
MCM Model Shown
a-Top Cover (MCM Models Only)
b-Insulator Plate
c-Fuel Return Line from Regulator
d-Brass Fitting
e-Fuel Line to Fuel Pump
f-Brass Fitting
g-Fuel Filter Mounting Bracket
h-Nut
i-Fuel Inlet Fitting
j-Plug
k-Water Separating Fuel Filter
l-Bottom Cover (MCM Models Only)
Water Separating Fuel Filter Replacement
1. Disconnect battery cables from battery.
2. Remove fuel filter from base. A filter wrench may be needed to loosen element.
3. Lubricate sealing ring(s) of new filter with engine oil.
4. Install new filter. Tightening securely by hand.
5. Reconnect battery cables. Make sure water is supplied to cooling system, start engine,
and check for fuel leaks.
Downloaded from https://needmanual.com/!
To Next Page
Loading...
Need help?
General