Metrohm AUTOLAB MULTI M101 User Manual

Insert a new module for the Multi Autolab Cabinet
Figure 30 – Adding all the M101 or M204 modules to the Multi Autolab Cabinet
5.1.2 – Installation of M101 or M204 modules into an existing Multi Autolab Cabinet
When the M101 or M204 modules are installed into an existing Multi Autolab Cabinet with
at least one M101 or M204 module already installed and configured, the new modules
need to be added to the existing Multi Autolab Cabinet.
After starting the Edit Serial Number application, the existing Multi Autolab Cabinet as well
as the new M101 or M204 modules will be listed in the frame on the left-hand side (see
Figure 31).
27 | Page

Metrohm AUTOLAB MULTI M101 Specifications

General

Brand	Metrohm
Model	AUTOLAB MULTI M101
Category	Switch
Language	English