4
Gas Type
MODEL
Natural
Gas
Propane
(LPG)
Natural
Gas
Propane
(LPG)
Gas Input（MJ/h）
160
Inlet Pressure（kPa）
1.13 - 2.75 2.75 - 4.00
Main Injector（mm）
ij ij
Test Point Pressure High/Low（kPa）
0.87/0.18 1.92/0.18
Water Heating Capacity (At 25ºC Rise）
20L/min
Max. Water Pressure（kPa）
1000
Min. Water Pressure （kPa）
150
Relief Valve Pressure Setting（kPa）
1200
Gas Connection
Water Connections
Ingress Protection Rating（AS60529):
Ignition
Rated Voltage：
Net Weight（kG)
15.4
Gross Weight（kG）
16
Product Dimensions（mm）
595 x 375 x 165
IAPMO Water Mark Approval Number：
IAPMO Gas Mark Approval Number：
GMK10177
Package Dimensions（mm）
748 x 420 x 230
200
M20/M20-50 M26/M26-50
1.13 - 2.75 2.75 - 4.00
ij
ij
0.83/0.21 0.92/0.27
26L/min
3/4” (Nom 20mm)
1/2” (Nom 15mm)
IPX4
Electronic
AC.240V/50Hz
19.2
21.5
628 x 413 x 177
735 x 455 x 267
2. SPECIFICATIONS
NOTES
The appliance will operate at reduced performance below 340 kPa water pressure.
For information relating to burner test point pressures and injector sizes refer to the name
plate located on the right hand side of the case for each model. (please refer to p.9)
For information relating to overall dimensions and connection points refer to diagrams.
(Please refer to p.6 & 7)
Installing in areas over 1500 m above sea level will reduce performance.
TECHNICAL DATA AND DIMENSIONS
Ɣ
Ɣ
Ɣ
Ɣ
WARNING —
THIS APPLIANCE MAY DELIVER WATER AT HIGH TEMPERATURE. REFER TO
THE PLUMBING CODE OF AUSTRALIA (PCA), LOCAL REQUIREMENTS AND
INSTALLATION INSTRUCTIONS TO DETERMINE IF ADDITIONAL DELIVERY
TEMPERATURE CONTROL IS REQUIRED.
WM-022451
To Next Page
Loading...
Need help?
General
