Midea MISSION2 3D INVERTER Series User Manual

Maintenance and
Disassembly
 Page 47 
Procedure Illustration
4) Remove the screws of the left panel
and then remove the right panel
(2 screws) (see CJ_B01_INV_003).
5) Remove the screws of the front panel
and then remove the front panel (7
screws) (see CJ_B01_INV_004).
6) Remove the screws of water collecting
cover and then remove the water
collecting cover (1 screw) (see CJ_B01_
INV_005).
CJ_B01_INV_003
CJ_B01_INV_004
CJ_B01_INV_005
Note: This section is for reference only. Actual unit appearance may vary.
Front Panel
Water Collecting Cover

Midea MISSION2 3D INVERTER Series Specifications

General

Brand	Midea
Model	MISSION2 3D INVERTER Series
Category	Air Conditioner
Language	English