To Next Page

To Previous Page

Troubleshooting

 Page 73 

3. Safety Caution

WARNING

Electricity remains in capacitors even when the power supply is off.

Ensure the capacitors are fully discharged before troubleshooting.

For other models, connect discharge resistance (approx.100Ω 40W) or a soldering iron plug between the positive and

negative terminals of the electrolytic capacitor. The terminals are located on the bottom surface of the outdoor PCB.

Note: This picture is for reference only. Actual appearances may vary.

Electrolytic Capacitors

Midea MISSION2 3D INVERTER Series User Manual

Questions and Answers: