EasyManuals Logo
Home>Midea>Air Conditioner>V6 Series

Midea V6 Series User Manual

Midea V6 Series
136 pages
To Next Page IconTo Next Page
To Next Page IconTo Next Page
To Previous Page IconTo Previous Page
To Previous Page IconTo Previous Page
Page #135 background imageLoading...
Page #135 background image
V6 VRF 50Hz
134
Midea V6 Series Service Manual
3.2 Normal Operating Parameters of Refrigerant System
Under the following conditions, the operating parameters given in Tables 5-5.4 and 5-5.5 should be observed:
The master outdoor unit can detect all the indoor units.
The number of indoor units displayed on DSP2 is steady and is equal to the actual number of indoor units installed.
All stop valves are open and all indoor unit EXVs are connected to their units PCB.
If the combination ratio is 100% or less, all the indoor units are currently running and if the combination ratio is more
than 100%, indoor units with total capacity equal to the total capacity of the outdoor units are currently running.
If the outdoor ambient temperature is high, the system is being run in cooling mode with the following settings:
temperature 17°C ; fan speed high.
If the outdoor ambient temperature is low, the system is being run in heating mode with the following settings:
temperature 30°C ; fan speed high.
The system has been running normally for more than 30 minutes.
Table 6-3.4: Outdoor unit cooling mode operating parameters
Outdoor ambient temperature
°C
< 10
10 to 26
26 to 31
31 to 41
> 41
Average discharge temperature
°C
60-76
62-78
65-82
67-92
69-92
Average discharge superheat
°C
17-30
17-33
17-34
17-36
10-32
Discharge pressure
MPa
2.3-2.8
2.3-2.8
2.4-3.6
2.6-3.8
3.1-4.2
Suction pressure
MPa
0.6-0.7
0.7-0.9
0.8-1.0
1.0-1.2
1.2-1.4
DC inverter compressor current
A
9-20
11-22
12-25
15-29
20-26
Table 6-3.5: Outdoor unit heating mode operating parameters
Outdoor ambient temperature
°C
< -10
-10 to 0
0 to 5
5 to 10
10 to 17
> 17
Average discharge temperature
°C
56-74
57-76
58-78
61-82
63-82
63-82
Average discharge superheat
°C
17-35
17-35
17-35
17-33
14-33
14-33
Discharge pressure
MPa
1.7-2.4
1.8-2.5
1.9-3.0
2.2-3.2
2.3-3.2
2.3-3.2
Suction pressure
MPa
1.4-1.6
1.5-1.7
1.6-2.2
1.8-2.6
1.8-2.6
2.0-2.4
DC inverter compressor current
A
11-25
13-27
12-28
11-28
11-25
15-20

Table of Contents

Questions and Answers:

Question and Answer IconNeed help?

Do you have a question about the Midea V6 Series and is the answer not in the manual?

Midea V6 Series Specifications

General IconGeneral
BrandMidea
ModelV6 Series
CategoryAir Conditioner
LanguageEnglish

Related product manuals