2. Hold on outer door assembly. Remove all screws for fixing the operating board.
Part Name: 1 – outer door 2 – handle cover 3 – operating board
Caution: Inner door of edges are sharp. Some corners and edges of parts are sharp.
3. Remove all screws for fixing handle cover.
4. Reverse the above procedure to install. And check out all connectors connects well.
FrontView(withouterdoorassemblyremoved)
Part Name: 1 – door handle assembly 2 – microswitch (Door handle assembly)
3 – dispenser 4 –door hinge (right) 5 – Rod for door hinges
6 – door hinge (left) 7 – operating board
The dispenser automatically dispenses both the detergent and
the rinse agent at the appropriate times. The dispenser is
activated twice during a wash cycle.
The first time, the dispenser is activated, the lever slides up the
right-hand path of the connecting rod. This action moves the cover catch and releases the
detergent cover. When deactivated, the lever resets to rest under the notch in the center of the
Dispenser
1
2
3
Screws
5
1
2
3
4
6
7
Screws
To Next Page
Loading...
Need help?
General
