Switching on and off
26
Switching on
Switch the master switch on the right
hand side of the machine to the "I"
position.
Touch the On/Off sensor .
The machine will begin rinsing after the
heating-up phase. Hot water will come
out of the central spout.
You can now make drinks.
If the coffee machine still has an
operating temperature higher than
60 °C, then rinsing will not take place.
Switching off
Touch the On/Off sensor .
If coffee has been dispensed, the
coffee machine will rinse the coffee
pipework automatically before
switching off.
Switching off for longer
periods of time
If the coffee machine is not going to be
used for a longer period of time, e.g. if
you are going on holiday:
Empty the drip tray, the waste
container and the water container.
Clean all parts thoroughly, including
the brew unit.
Switch the machine off with the
master switch and at the wall socket.
The time of day set will be saved for a
maximum of ten days and after that
must be reset. Timer settings, profiles
and other settings will be kept.
To Next Page
Loading...
Need help?
General
