Cleaning and care
65
Milk pipework
All parts of the milk system need to
be cleaned thoroughly and regularly.
Milk contains bacteria which
proliferate rapidly with inadequate
cleaning. A dirty machine can be
harmful to health.
The milk pipework must be cleaned at
least once a week. A message in the
display will prompt you when this needs
to be done.
Confirm the message with OK.
When you confirm the message Clean
the milk pipework with OK, the internal
counter for the cleaning interval will be
reset. You will not be reminded again.
There are two options:
– You can remove and dismantle the
central spout with its integrated
cappuccinatore and either wash it in
the dishwasher or by hand with hot
water and a little washing-up liquid
(see "Central spout with integrated
cappuccinatore").
– Or you can clean the milk pipework
using the Clean the milk pipework
maintenance programme together
with cleaning agent for milk pipework
(see "Maintenance programme -
Cleaning the milk pipework").
Coffee bean container
Danger of injury from the grinder.
Disconnect the coffee machine from
the power supply before cleaning.
Coffee beans contain oils which can
deposit on the walls of the bean
container and hinder the flow of the
beans. Therefore, clean the bean
container regularly with a soft cloth.
Tip: Use a vacuum cleaner to remove
any coffee residues from the bean
container.
Take the lid off the coffee bean
container.
Remove any coffee beans.
Clean the bean container with a dry,
soft cloth.
The bean container can now be refilled.
Replace the lid.
Tip: If required you can clean the lid of
the bean container by hand with warm
water and a little washing-up liquid. Dry
the lid thoroughly before replacing it on
the bean container.
To Next Page
Loading...
Need help?
General
