Operation (Automatic and Manual modes)
26
Activating/changing the charcoal
filter saturation timer
The filter saturation timer for the
charcoal filter requires one-time
activation and must be set to match
your cooking habits.
Switch off the ventilation hood. The
canopy must be retracted.
Remove the grease filters.
The controls are accessible via the slots
for the grease filters.
Press the "" symbol and the filter
saturation indicator at the same
time.
The charcoal filter symbol and one of
the fan power level indicators will flash.
The indicators 1 to IS show the current
time setting:
Indicator 1 ............................ 120 hours
Indicator 2 ............................ 180 hours
Indicator 3 ............................ 240 hours
Indicator IS ......................... deactivated
Press the "" symbol for a shorter
operating time, or the "" symbol to
select a longer operating time.
Confirm the selection by pressing the
filter saturation indicator .
All the indicator lights go out.
If the new setting is not confirmed
within 4 minutes, the hood reverts to
the previous setting.
To Next Page
Loading...
Need help?
General
