Cleaning and care
32
Resetting the filter saturation counter
for the grease filters
Once cleaning is complete, the filter
saturation counter must be reset.
While the fan is turned on, press the
filter saturation indicator for
approx. 3 seconds until 1 is the only
indicator flashing.
The grease filter symbol goes out.
When cleaning the grease filters before
the full operating time has elapsed:
Press the filter saturation indicator
for approx. 6 seconds until 1 is
the only indicator flashing.
OdorFree Charcoal Filter
With recirculation mode, two charcoal
filters must be fitted in addition to the
grease filters. These are designed to
absorb cooking odors.
Charcoal filters are available from your
Miele dealer or from Miele. See
"Technical data" for the type and
reference number.
Installing/replacing the charcoal filter
The slots for the charcoal filters are
located above the grease filters.
Remove the cover. It is held in place
by magnets.
Remove the charcoal filter from its
packaging.
Insert the charcoal filters in the slots.
Refit the cover.
When installing the filter for the first
time, activate the filter saturation
counter (see "Operation").
To Next Page
Loading...
Need help?
General
