Activating Con@ctivity 2.0
49
Activating the cooktop
While the ventilation hood is
searching for a wireless connection,
start activation on the cooktop.
More information can be found in the
operating instructions for the
cooktop.
When the cooktop registers that
connection has been established,
confirm activation on the ventilation
hood with the delayed shut-down
button 515. All indicators will go
out.
Confirm activation on the cooktop.
The Con@ctivity 2.0 function is now
ready for use.
If you do not confirm within 4 minutes,
activation will be canceled.
You only need to carry out the
activation procedure once. If the
appliances are disconnected from the
electricity supply, for example during a
loss of power, they will still remain
activated.
Activation failed
If a wireless connection cannot be
established despite activation of the
Con@ctivity function on the
ventilation hood and cooktop, the
function must first be deactivated and
then reactivated on both appliances.
Deactivating Con@ctivity 2.0
Deactivation on the ventilation hood
is carried out in the same way as
activation, by selecting instead of
.
To deactivate the burner, please refer
to the corresponding operating
instructions.
Please keep in mind that disabling the
connection will also disable any
remote control function being used.
The remote control must then be
reactivated.
To Next Page
Loading...
Need help?
General
