Cleaning and care
34
Remote control
Cleaning the remote control
Only clean the surface with a damp
cloth. Do not use too much water to
avoid moisture penetrating the
casing.
Changing the battery
Use only the type of battery listed.
Do not use rechargeable batteries.
The remote control requires one 3V CR
2032 battery.
The battery must be changed if
ventilation hood functions can no longer
be selected using the remote control or
if the LED light on the remote control
does not light up, or only lights up dimly
when a control is pressed.
Ventilation hood functions can still be
selected using the ventilation hood
controls.
Use a screwdriver to loosen the two
screws on the back and remove the
cover.
Remove the old battery and replace
with a new one, making sure the
polarity is correct.
Refit the cover.
Dispose of the old battery
responsibly.
To Next Page
Loading...
Need help?
General
