Demo mode
i
Demo mode
for showrooms only
Demo mode is for dealers who want to demonstrate the
appliance without the heater elements working. Do not
activate this setting for domestic use!
After a short while the message will go out and the Demo
mode can be switched on or off.
Factory default
SETTINGS F Back A
FACTORY DEFAULT
ALL SETTINGS
USER PROGRAMMES
MAIN MENU H
^ Select and confirm the setting you want.
ALL SETTINGS: Any setting that you have altered will be reset
to the factory default setting. User defined programmes will
be deleted.
USER PROGRAMMES: User defined programmes will be
deleted.
MAIN MENU: The main menu will be reset to the factory
default setting.
TEMPERATURES: Any alterations to recommended
temperatures will be reset to the factory default settings.
Changing settings
48
To Next Page
Loading...
