Water container
Remove, empty and dry the water
container after each use. Also remove
the insert from the water container.
^
Release the insert by pushing the
catches on the sides in towards each
other and then pull it out of the
container.
^
After cleaning, dry both parts of the
insert thoroughly before replacing it
in the water container. When
replacing the insert (see illustration),
guide it in at an angle a and push
the side with the opening downwards
b.
Do not immerse the water container
in water or clean it in a dishwasher.
It is important to empty the water
container after each use for hygiene
reasons, and also to prevent
condensate building up in the
appliance.
Do not use scouring pads or hard
brushes.
Cleaning and care
66
b
a
To Next Page
Loading...
Need help?
General
