Preparing the appliance for use
^
Fill the water container with mains tap water up to at least
the "min" marker. You do not need to remove the insert.
Only use mains tap water. Never use distilled or mineral
water or other liquids.
^
Push the water container into the appliance until it
connects.
If the water container is not positioned correctly, the
appliance will not heat up and after a while F20 will appear in
the display (see "Problem solving guide").
^
Place the food in the oven.
Selecting a function
^ Turn the function selector to the required function, e.g.
Cook universal Q.
Cook universal
100 °C
-:- - h : min
Setting the temperature
If necessary, you can reduce the temperature by turning the
temperature selector.
Cook universal
95 °C
-:--h:min
Operation
24
To Next Page
Loading...
Need help?
General
