c Automatic programmes
The weight entry in the Automatic programmes refers to the
weight per piece. For example, you can cook just one piece
of salmon weighing 250 g or 10 pieces of salmon weighing
250 g at the same time.
^
Fill the water container with fresh tap water and push it into
the appliance.
^
Insert the condensate tray, if required, at the lowest level.
^
Place the food in the appliance.
^
Turn the function selector to Automatic c.
Automatic progs.
Cook vegetables *
Cook fish +
^ Use ; or ? to select the programme you want and confirm
with "OK".
Cook fish
Seabream *
Trout +
^
Use ; or ? to select the type of food you want and confirm
with "OK".
Depending on the programme and the type of food selected,
–
the display will indicate which shelf level to use and at
what time the food needs to be placed in the oven. Confirm
these.
–
you will be asked about the size of the food and how well
done you would like it, or the level of browning you require.
The factory default setting is medium (for how well done
the food is to be) and a medium level of browning. It is
best to use the suggested values to start with. If food is not
cooked sufficiently it can be put back in the oven and
cooked some more.
Operation
36
To Next Page
Loading...
Need help?
General
