With the help of the following notes, minor faults in the performance of the
appliance, some of which may result from incorrect operation can be put right
without contacting the Service Department.
,
Installation work and repairs to electrical appliances should only be carried
out by a suitably qualified person in strict accordance with current local and
national safety regulations (BS 7671 in the UK). Repairs and other work by
unqualified persons could be dangerous. The manufacturer cannot be held
liable for unauthorised work.
Problem Possible cause Remedy
You cannot switch the
appliance on.
The mains fuse has
tripped.
Reset the trip switch in
the mains fuse box
(minimum fuse rating -
see data plate).
There may be a technical
fault.
Disconnect the appliance
from the electricity supply
for approx. 1 minute.
– switch off at the wall
socket and withdraw
the plug, or
– switch off at the
isolator, or
–
disconnect the mains
fuse.
Reset the trip switch in
the mains fuse box, and
switch the appliance
back on. If it still will not
switch on, contact a
qualified electrician or the
Miele
Service Department.
Problem solving guide
63
To Next Page
Loading...
Need help?
General
