Water hardness
The appliance is set at the factory to water hardness
setting IV (Very hard). You can set the steam combi oven for
the water hardness level in your area.
You can use the test strip supplied to check the water
hardness level, or your local water supplier will be able to
advise you on the water hardness of your area.
The water hardness is shown as settings I to IV equivalent to
the German scale 1 to >21 °dH (0.2 >3.8 mmol/l).
Hardness level Hardness range Setting
I 1-7 °dH
(2.7-3.8 mmol/l)
Soft
II 8-14 °dH
(2.7-3.8 mmol/l)
Medium
III 15-21 °dH
(2.7-3.8 mmol/l)
Hard
IV >21 °dH
(above 3.8 mmol/l)
Very hard
Display
The contrast and brightness can be adjusted.
Volume
The volume of the buzzer and keypad tone can be altered.
The volume is represented by a bar with seven segments. If
all of the segments are illuminated, the volume is set at
maximum volume. If none of the segments is illuminated, the
sound is switched off altogether.
Settings
44
To Next Page
Loading...
Need help?
General
