Water container
Remove, empty and dry the water container after each use.
^
Release the insert by pushing the catches on the sides in
towards each other and the pull it out of the container.
^
After cleaning, dry both parts of the insert thoroughly
before replacing it in the water container. When replacing
the insert, guide it in at an angle a and then push it
downwards b as illustrated.
Do not immerse the water container in water or clean it in a
dishwasher.
It is important to empty the water container after each use
for hygiene reasons, and also to prevent condensate
building up in the appliance.
Do not use scouring pads or hard brushes.
Cleaning and care
54
To Next Page
Loading...
Need help?
General
