User programmes
129
You can create and save up to 20 of
your own programmes.
– You can combine up to 9cooking
stages to accurately programme your
favourite or most frequently used re-
cipes. In each cooking stage, you
can select settings such as the func-
tion, temperature and cooking dura-
tion.
– You can enter the name of the pro-
gramme for your recipe.
When you call up and start your pro-
gramme again, it will run automatically.
There are different ways of creating a
user programme:
– At the end of an automatic pro-
gramme or special application, save
it as a user programme.
– Save a cooking programme after run-
ning it with a set cooking duration.
Then enter a programme name.
Creating user programmes
Select User programmes.
Select Create programme.
You can now specify the settings for the
first cooking stage.
Follow the instructions in the display:
Select and confirm the desired set-
tings.
Select Finish cooking stage.
All settings for the first cooking stage
have now been set.
You can add more cooking stages, for
example, if you want to add another
cooking function to follow on from the
first.
If additional cooking stages are re-
quired, select Add cooking stage and
proceed as per the 1st cooking stage.
If you want to check the settings or to
change them at a later date, select the
cooking stage in question.
When you have finished setting all the
cooking stages, selectSave.
Enter the programme name.
Select.
A message will appear in the display
confirming that the programme name
has been saved.
Confirm withOK.
You can start the saved programme im-
mediately, delay the start or change the
cooking stages.
To Next Page
Need help?
General
Weight and Dimensions
